Shredder Applications
Tires, plastics, metals, e-waste, solid waste, and paper each need different torque, cutters, and output control. Share your material and target size; BoRay will match the shredder direction and test difficult samples when needed.
Choose by Material
Each material stream has different feeding behavior, wear level, contamination risk, and output requirement. Select the closest application below, then send material details for a more accurate configuration.
Whole tires, truck tires, OTR tires, rubber blocks, and tire recycling pre-processing.
For tire recyclers, pyrolysis preparation, TDF preparation, rubber block production, and steel wire recovery projects.
Plastic lumps, purgings, pipes, film, bottles, crates, pallets, and production scrap.
For plastic recycling plants, injection molding scrap, extrusion waste, pipe recycling, film washing, and size reduction before granulation.
Steel scrap, aluminum, drums, cables, profiles, and mixed industrial metal waste.
For scrap metal recycling, aluminum recovery, drum shredding, cable pre-processing, and mixed industrial scrap reduction.
PCBs, IT equipment, appliances, data-bearing devices, cables, and electronic scrap.
For e-waste recycling, hard drive destruction, PCB pre-processing, appliance scrap, and mixed electronics recovery.
Municipal solid waste, bulky waste, commercial waste, RDF, and industrial waste.
For MSW sorting lines, bulky waste reduction, commercial waste processing, RDF preparation, and industrial waste pre-shredding.
Paper rolls, archives, documents, cardboard, packaging paper, and baled paper waste.
For paper mills, document destruction, archive disposal, cardboard recycling, packaging waste, and pulping preparation.
If you are not sure which solution your material belongs to, send photos, videos, feed size, and output target. BoRay will help evaluate the suitable shredder direction.
How to Choose
A practical shredder selection starts with the material stream, feeding condition, output size, and downstream process. BoRay uses these details to narrow the machine direction before preparing a configuration quote.
Different materials require different torque, cutter geometry, feeding control, screen opening, and wear protection. A tire shredder, plastic shredder, metal shredder, and solid waste shredder should not be quoted from the same basic assumptions.
Some projects need rough volume reduction before sorting. Others need controlled output before granulation, washing, separation, baling, pulping, pyrolysis, or RDF preparation. The output target changes the machine direction.
Feed size, thickness, contamination, working hours, capacity target, and site layout affect the final configuration. BoRay reviews these details before recommending a single shaft, double shaft, heavy-duty, or line-integrated solution.
Machine Direction
The application confirms the material problem. The machine direction is then selected by feeding form, toughness, output target, and downstream process.
Recommended for bulky feeding, strong material grabbing, low-speed high-torque reduction, and front-end pre-shredding before sorting, separation, recycling, or further size reduction.
Recommended when the project needs screen-controlled output size, hydraulic pusher feeding, and stable reduction for plastics, paper, wood, cable, aluminum, fiber, and selected industrial waste.
Before Quotation
A reliable quotation should be based on your real material and process target. These four details help avoid quoting a machine that is underpowered, oversized, or unsuitable for the downstream line.
Sample Testing
For uncertain or difficult materials, a sample test can show how the material feeds, tears, and discharges in real operation. Based on your material type, BoRay can test the shredding process and send video evidence for your review.
If photos or videos are not enough, you can send representative material samples to BoRay for a shredding test.
We evaluate feeding behavior, cutting performance, discharge condition, and whether the material matches the expected shredder direction.
BoRay can record the shredding process and send you video proof, so you can review the output result before confirming the next step.
Factory Evidence
For overseas recycling projects, buyers need to evaluate both the application knowledge and the factory behind the quotation. BoRay shows real workshop production, assembly, and finished-machine checking before delivery.
Heavy-duty frame work supports long-term recycling operation.
Chamber, shaft, and assembly details are checked before delivery.
Machines are checked against the project configuration.
